ap1322p1351a

Check poly-V belt for wear and damage

ประเภท ap · หัวข้อ 13.22 · เวอร์ชัน 0200 · 2012-04-05

ใช้กับ: ENGINE 102 in MODEL 460 /, 461.217 /219 / 227 /229 / 238 /239 / 249 /266 /267, 463.200 /204 /220 /221 / 224 /225 ENGINE 103 in MODEL 463.207 /227 /228 ENGINE 104 in MODEL 463.208 /230 /231 ENGINE 602 in MODEL 460, 461.321 /322 /323 /326 /327 /328 /329 /335 /336 /337 /338 /341 /365 /366 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459, 463.304 /324 /325 ENGINE 603 in MODEL 463.300 /307 /320 /321 /327 /328 ENGINE 606 in MODEL 463.308 /330 /331

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 13 Air compressor, belt drives › 13.22 Single-belt drive — ซีรีส์ 460 · ซีรีส์ 461 (รุ่น 217, 219, 227, 229, 238, 239, 249, 266, 267, 321, 322, 323, 326, 327, 328, 329, 335, 336, 337, 338, 341, 365, 366, 367, 368, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · ซีรีส์ 463 (รุ่น 200, 204, 207, 208, 220, 221, 224, 225, 227, 228, 230, 231, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331) · ซีรีส์ 602

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — ซีรีส์ 460 · ซีรีส์ 461 (รุ่น 217, 219, 227, 229, 238, 239, 249, 266, 267, 321, 322, 323, 326, 327, 328, 329, 335, 336, 337, 338, 341, 365, 366, 367, 368, 401, 402, 403, 404, 405, 450, 451, 452, 454, 455, 456, 458, 459) · ซีรีส์ 463 (รุ่น 200, 204, 207, 208, 220, 221, 224, 225, 227, 228, 230, 231, 300, 304, 307, 308, 320, 321, 324, 325, 327, 328, 330, 331) · ซีรีส์ 602

ใช้กับเครื่องยนต์/เกียร์ด้วย: 102 ***, 103 ***, 104 ***, 603 ***, 606 ***

AP13.22-P-1351A

Check poly-V belt for wear and damage

23.3.12

ENGINE 102 in MODEL 460 /, 461.217 /219 / 227 /229 / 238 /239 / 249 /266 /267, 463.200 /204 /220 /221 / 224 /225

ENGINE 103 in MODEL 463.207 /227 /228

ENGINE 104 in MODEL 463.208 /230 /231

ENGINE 602 in MODEL 460, 461.321 /322 /323 /326 /327 /328 /329 /335 /336 /337 /338 /341 /365 /366 /367 /368 /401 /402 /403 /404 /405 /450 /451 /452 /454 /455 /456 /458 /459, 463.304 /324 /325

ENGINE 603 in MODEL 463.300 /307 /320 /321 /327 /328

ENGINE 606 in MODEL 463.308 /330 /331

Modification notes

2.3.12

Test sequence revised

Operation step 1 to 12

AP13.22-P-1351-01A

Checking

Danger!

Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof

Keep body parts and limbs well clear of moving parts.

AS00.00-Z-0011-01A

1

Switch off ignition

2

Mark poly-V belt on easily visible position using chalk mark

Danger!

Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

3

Check poly-V belt for wear and damage, and compare with damage profiles

To do so, crank engine with socket on crankshaft in direction of engine or crank engine gradually with starter.

AP13.22-P-1351-01A

Replace poly-V belt if necessary, subject to separate invoice.

Socket wrench bit

*001589650900

Check poly-V belt for wear and damage

001 589 65 09 00

Wrench socket

เอกสารที่อ้างถึง