Steering knuckle (front axle, second front axle, steerable leading/ trailing axle) |
Pfeil | Lubricating nipple |
N33.25-0238-01
Brake shafts (front axle drum brakes) |
Pfeil | Lubricating nipple |
N42.15-0202-01
Brake shafts (rear axle drum brakes) |
Pfeil | Lubricating nipple |
N42.15-2059-01
N42.15-0200-01
Linkage adjuster (drum brake) |
Pfeil | Lubricating nipple |
N42.15-2058-01
Spare tire shaft (example) |
Pfeil | Lubricating nipple |
N40.00-2019-01
Ring magnet for auxiliary steering (ECONIC with DB system on leading axle, trailing axle) |
Pfeil | Lubricating nipple |
N46.80-2001-01
Universal joints of propeller shafts (drivetrain and power take-off) |
Pfeil | Lubricating nipple |
N41.10-2020-01
Axle load compensation (example) |
Pfeil | Lubricating nipple |
N32.20-2050-06
Trailing axle 749.011 (Nummek) |
4 | Breather |
Pfeil | Lubricating nipple |
N35.50-2094-06
Trailing axle 749.733 (axle lift) |
Pfeil | Lubricating nipple |
N35.50-2096-01
N35.50-2097-01
Front cab mount (convenience mounting) |
Pfeil | Lubricating nipple |
N31.00-2056-01
Trailer hitch |
Pfeil | Lubricating nipple |
N31.10-0257-01
N31.10-2086-01
N32.00-2029-01
Shown on rear spring pin of rear axle spring on model 375.3, 940.365 with axle configuration 62, 82 | ||||
Pfeil | Lubricating nipple | |||
Shown on pendulum spring compensator of rear axle spring on model 375.3, 940.365 with axle configuration 62, 82 | ||||
Pfeil | Lubricating nipple | |||
B00.20-0010-01
N55.20-0211-09
Dumper system |
1 | Lubrication point for grease gun | 2 | Lubrication point for loose grease | ||||
1.1 | Lubrication point for grease gun (if available) | 3 | Lubrication point for oil |
Dumper system |
2 | Lubrication point for loose grease |
3 | Lubrication point for oil |
N55.20-2018-10
Lubricate | |||
1 | Lubricate lubrication points on the special bodies as well as the associated major assemblies and propshafts according to the information in the maintenance instructions from the manufacturer. | Only on vehicles with special bodies and additional assemblies. | |
Lubrication of special bodies and additional assemblies, subject to separate repair order. | |||
2 | Remove trim on front end | If necessary. | |
3 | Clean lubricating nipple (arrow) with a shop towel | ||
4 | Open trailer hitch | | |
Danger | Risk of death. There is a risk of death to persons located within the tilting range or underneath the raised dump body during operation. Risk of injury There is a risk of body parts being crushed or pinched when the dump body is lowered. | All persons must remain outside the tilting range of the dump body during its operation. Always secure the raised dump body with the dump body support before starting any work underneath it. | |
5 | Lubricate dumper system | Model 374.607/691/695, 375.303/323/373/374, 932, 942, 952, 972 | |
Follow the manufacturer's maintenance instructions. | |||
6 | Lubricate lubrication points | Except propeller shafts. | |
| Multipurpose grease (NLGI Class 2) | ||
When using high-pressure grease guns, do not use a lubrication pressure of more than 180 bar. | |||
7 | Lubricate propeller shafts | ||
| Propeller shaft grease | ||
| |||
A lubrication pressure of 180 bar must not be exceeded when using high pressure grease guns. | |||
8 | Lubricate trailing axle on left and right until multipurpose grease emerges at the breather (4) | Model 930 with rear axle 749.011 | |
| Multipurpose grease (NLGI Class 2) | ||
When using high-pressure grease guns, do not use a lubrication pressure of more than 180 bar. | |||
9 | Lubricate rear axle springs | Model 375.3 | |
| Multipurpose grease (NLGI Class 2) | ||
10 | Remove multipurpose grease which has escaped at the lubrication points | ||
11 | Install trim on front end | If necessary. |