T55.50-0026-01
1 Grease nipple
2 Sight glass
T55.50-0019-11
3 Grease nipple
| Only use high-pressure grease guns that do not exceed a pressure of 40 bar for greasing the lubricating nipple | ||
1 | Continue greasing lubricating nipples (1) until the check pin is fully visible in the inspection glass (2) | Do not interrupt lubricating operation until the check pin is fully visible. After completing the lubricating operation, the check pin moves back into its initial position. Specified grease qualities and approved grades of grease conforming to Specifications for Service Products | |
Sheet 267.0 | |||
| Cleaning | ||
2 | Clean lubricating nipples (3) with a cleaning cloth | ||
3 | Grease lubricating nipples (3) | Multi-purpose grease according to Specifications for Service Products | |
Sheet 267.0 | |||
After lubricating, remove any grease which has escaped. | |||
4 | Lubricate locks, hinges, bearings, joints, levers, fork ends, control cables and maintenance flaps with grease (loose) or oil (can) |