AP00.20-T-0020A | Lubrication points | 14.9.98 |
MODEL 613.355 /358 /388 /455 /485, 671.000 /005 /010 /312 /322 /327 /015 /020 /021 /030 /042 /332 /333
T33.25-0003-02
Illustrated on model 613
Steering knuckle
T41.10-0008-11
Illustrated on model 613
Propeller shaft
T42.15-0004-11
Only valid for model 671
Brake camshafts at front axle
T42.15-0002-01
Only valid for model 671
Brake camshafts at center/rear axle
Only valid for model 671
Brake camshafts at center/rear axle
T42.15-0003-01
T46.40-0005-11
Only valid for model 671
Lubricating nipples at pitman arm
T46.40-0009-01
Only valid for model 613
Lubricating nipples at steering idler arm
| Only use high-pressure grease guns that do not exceed a pressure of 40 bar for greasing the lubricating nipple | ||
| Cleaning | ||
1 | Clean lubricating nipples with a cleaning cloth | ||
2 | Lubricate lubrication points | Multi-purpose grease according to Specifications for Service Products | |
Sheet 267.0 | |||
After lubricating, remove any grease which has escaped. | |||
3 | Lubricate locks, hinges, bearings, joints, levers, fork ends, control cables and maintenance flaps with grease (loose) or oil (can) |