P00.20-A014-08
1 | Engine cover | 3 | Left rear engine compartment paneling | |
2 | Right rear engine compartment paneling |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Warning | Risk of injury due to fan starting unexpectedly | Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Notes on battery | ||
Notes on evaluating leakages | |||
| Remove | ||
1 | Remove left rear engine compartment trim (3). | ||
2 | Remove right rear engine compartment trim (2). | ||
3 | Remove engine cover (1). | ||
| Check | ||
4 | Check visible systems and component parts in the engine compartment for condition, leaks and mounting. | If necessary, use commercially available devices/tools. | |
Engine and mounted major assemblies, | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
5 | Check visible systems and component parts in the engine compartment for condition, leaks and mounting. | Equipment-dependent. | |
If necessary, use commercially available devices/tools. | |||
Stationary heater. | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
6 | Check that visible lines and hoses in the engine compartment are in good condition, are not leaking, are routed correctly and are attached securely. | If necessary, use commercially available devices/tools. | |
Engine and mounted major assemblies, | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
7 | Check that visible lines and hoses in the engine compartment are in good condition, are not leaking, are routed correctly and are attached securely. | Equipment-dependent. | |
If necessary, use commercially available devices/tools. | |||
Stationary heater. | |||
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
8 | Check visible systems, component parts and body panels, lines and hoses in the engine compartment on vehicle underside for damage, routing, leaks, mounting and corrosion. | ||
| Install | ||
9 | Install engine cover (1). | ||
10 | Install right rear engine compartment trim (2). | ||
11 | Install left rear engine compartment trim (3). |