Shown on model 212 |
P00.00-4895-11
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Notes on battery | ||
Notes on evaluating leakages | |||
Preparatory activity | |||
1 | Open engine hood and raise to vertical position | Model 164, 171, 172, 197.3/4, 203, 204, 207, 209, 211, 212, 216, 218, 219, 221, 230, 231, 251 | |
| Model 204.3, 207, 212 | ||
Model 204.3, 207, 212 | |||
2 | Remove covering on brake unit | Model 197.3/4 | |
| Check | ||
3 | Check that visible systems and components in engine compartment are in good condition, are not leaking and are attached securely | Engine and mounted major assemblies and exhaust system, | |
If there are complaints: | |||
| |||
Rectify problem subject to separate repair order. | |||
4 | Check that visible lines and hoses in engine compartment are in good condition, are not leaking, are routed correctly and are attached securely | Engine and mounted major assemblies and exhaust system, | |
If there are complaints: | |||
| |||
Rectify problem subject to separate repair order. | |||
5 | Check visible systems, components and body panels, lines and hoses in engine compartment on vehicle for damage, routing, leaks, mounting and corrosion | ||
Finishing activity | |||
6 | Close engine hood | Model 164, 171, 172, 197.3/4, 203, 204, 207, 209, 211, 212, 216, 218, 219, 221, 230, 231, 251 | |
| Model 204.3, 207, 212 | ||
Model 204.3, 207, 212 |