Shown: model 453 with code K35 (Instrument cluster with monochrome display) |
1 | Multifunction display |
2 | OK button |
3 | Scroll forward button |
P00.20-2904-06
Shown: model 453 with code K36 (Instrument cluster with 8.9 cm (3.5") color display) |
1 | Multifunction display |
2 | OK button |
3 | Scroll forward button |
P00.20-2827-06
Preparatory activity | |||
1 | Close front-end flap, doors and liftgate | ||
Read out maintenance data | |||
2 | Switch electronic ignition lock control unit to position "1" (circuit 15R) | There must be no fault messages in the multifunction display (1). | |
3 | Press Scroll forward button (3) repeatedly until standard display "Trip distance/total distance" appears in multifunction display (1) | Kilometer or mileage reading must be noted in the reception report. | |
4 | Use Scroll forward button (3) to select "Messages and service" menu page on multifunction display (1) | The number of wrench symbols that appear on the multifunction display (1) indicates the service which is due: | |
Service A or B must be noted in the reception report. | |||
Reset service indicator | |||
5 | Press and hold OK button (2) until wrench symbol flashes on "Messages and service" menu page on multifunction display (1) and then keep depressed for another 20 s | If the OK button (2) is held down for another 20 s after the wrench symbol starts to flash on the multifunction display (1), the service interval indicator is reset and country-specific intervals are displayed. | |
Finishing activity | |||
6 | Switch electronic ignition lock control unit to position "0" |