1 | "Back" button |
2 | Finger navigation pad |
3 | Multifunction display |
D00.20-1160-76
1 | Close hood, doors and sliding doors. |
2 | Switch electronic ignition lock control unit (EZS) to position "1" (circuit 15R). |
3 | Using swipe movements on the finger navigation pad (2) to select the "Total distance" standard display in the multifunction display (3). |
4 | Press and hold "Back" (1) button for 2 s and press on finger navigation pad (2). |
The multifunction display (3) then shows the Workshop menu with the menu items: "Vehicle data", "Dynamometer test", "Change brakepad", "ASSYST PLUS". |
5 | Use swipe movements on the finger navigation pad (2) to select the "Roller test" menu item on the multifunction display (3). |
The "Roller test" menu item and "Switch on: OK " are shown on the multifunction display (3). |
6 | Switch on roller test mode by pressing the finger navigation pad (2). |
On the multifunction display (3), a tick is placed next to "Roller test" and "Switch off: OK" is shown. |
7 | After completion of the roller test, switch off roller test mode by pressing on the finger navigation pad (2) again. |
8 | Press "Back" (1) button repeatedly until the "Total distance" standard display appears in the multifunction display (3). |