1 | "Back" button |
2 | Finger navigation pad |
3 | Multifunction display |
D00.20-1160-76
1 | Close hood, doors and sliding doors. |
2 | Switch electronic ignition lock control unit (EZS) to position "1" (circuit 15R). |
3 | Using swipe movements on the finger navigation pad (2) to select the "Total distance" standard display in the multifunction display (3). |
4 | Press and hold "Back" (1) button for 2 s and press on finger navigation pad (2). |
The multifunction display (3) then shows the Workshop menu with the menu items: "Vehicle data", "Dynamometer test", "Change brakepad", "ASSYST PLUS". |
5 | Use swipe movements on the finger navigation pad (2) to select and confirm the "ASSYST PLUS" menu item. |
6 | Switch electronic ignition lock control unit (EZS) to position "2" (circuit 15R). |
The multifunction display (3) then shows the menu items: "Service data", "Full service", Vehicle handover" (if not yet conducted), "Engine oil level measurement". |
7 | Use swipe movements on the finger navigation pad (2) to select and confirm the "Vehicle handover" menu item. |
The multifunction display (3) then shows the prompt "Handover vehicle?" and the menu items "No", "Yes". |
8 | Use swipe movements on the finger navigation pad (2) to select and confirm the "Yes" menu item. |
The vehicle can be handed over up to a driven distance of 500 km. |
9 | Press "Back" (1) button repeatedly until the "Total distance" standard display appears in the multifunction display (3). |