an8288w000109d

Prepare console housing for on-board unit for installation and install

ประเภท an · หัวข้อ 82.88 · เวอร์ชัน 0200 · 2003-08-15

ใช้กับ: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F04) Cab L (long) with CODE (DD2) Cab with 1550 mm floor-to-ceiling height except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD3) Lowered cab with low roof Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F05) M-cab (medium-long) exce

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 3 Body › 82 Electrical system, body › 82.88 Toll system — ซีรีส์ 950 (รุ่น 0**, 1**, 2**, 3**) · ซีรีส์ 952 (รุ่น 0**, 1**, 2**, 3**) · ซีรีส์ 953 (รุ่น 1**, 3**) · ซีรีส์ 954 (รุ่น 0**, 1**, 2**)

EinPAS 31 Communication/information/entertainment › 31.35 Tachograph/toll system › 31.35.3 Retrofitting/modification — ซีรีส์ 950 (รุ่น 0**, 1**, 2**, 3**) · ซีรีส์ 952 (รุ่น 0**, 1**, 2**, 3**) · ซีรีส์ 953 (รุ่น 1**, 3**) · ซีรีส์ 954 (รุ่น 0**, 1**, 2**)

AN82.88-W-0001-09D

Prepare console housing for on-board unit for installation and install

Modification notes

17.7.03

Procedure modified

Steps 1 to 5

Prepare console housing for on-board unit for installation and install

W82.88-1058-11

1 Remove protective foil from the support webs (4) of the bracket (3).

2 Insert bracket (3) into the housing box (2) and when doing so guide wiring harness (5) through the bracket (3).

3 Position bracket (3) on left and at rear in the housing box (2) and adhere to the bottom of the housing box (2).

4 Connect cover panel to the housing box (2).

Prepare console housing for on-board unit for installation and install

W82.88-1113-11

5 Insert sheet-metal frame (1) through the opening in the cover panel (6) into the bracket (3) and bend the retainer tabs.