MODEL | 930, 932, 933, 934 |
with CODE EX3 (Provision for fitting telematics) | |
with CODE YM1 (FleetBoard vehicle computer) | |
MODEL | 940, 942, 943, 944 with BODY 944.890 |
with CODE EX3 (Provision for fitting telematics) | |
with CODE YM1 (FleetBoard vehicle computer) | |
MODEL | 950, 952, 953, 954 with BODY 940.890 |
with CODE EX3 (Provision for fitting telematics) | |
with CODE YM1 (FleetBoard vehicle computer) | |
MODEL | 970, 972, 974, 975, 976 with BODY 972.890 |
with CODE EX3 (Provision for fitting telematics) | |
with CODE YM1 (FleetBoard vehicle computer) |
1 | Electrical connectors |
2 | FleetBoard® DispoPilot.guide |
3 | Electrical wiring harness |
4 | Adapter |
5 | Strain relief |
W82.85-1755-12
4 | Adapter |
5 | Strain relief |
A | Positioning pins |
B | Holes |
W82.85-1756-12
2 | FleetBoard® DispoPilot.guide |
4 | Adapter |
6 | Ball head |
7 | Bolts |
8 | Screw |
Pfeil | Positioning pin |
W82.85-1757-11
W82.85-1758-08
2 | FleetBoard® DispoPilot.guide | 9 | Universal bracket | 11 | Mounting plate | ||
6 | Ball head | 10 | Nut |
| Remove | ||
1 | Remove center air vent | ||
| Model 930, 932, 933, 934 | ||
| Models 940, 942, 943, 944, 950, 952, 953, 954, 970, 972, 974, 975, 976 | ||
| Install | ||
2.1 | Retrofit DispoPilot.guide wiring harness | If DispoPilot.guide wiring harness is not present. | |
2.2 | Expose DispoPilot.guide wiring harness behind instrument panel | If DispoPilot.guide wiring harness is present. | |
3 | Route DispoPilot.guide wiring harness to a suitable installation position in the vehicle | The installation position of the universal bracket (9) must be able to permanently hold the weight of the FleetBoard® DispoPilot.guide (2) together with the vehicle bracket (approx. 1 kg). In addition, the driver's view of traffic must not be limited by the installed device. | |
4 | Connect electrical connectors (1) to FleetBoard® DispoPilot.guide (2) | ||
5 | Place electrical wiring harness (3) in adapter (4) and clip in strain-relief clamp (5) | ||
6 | Place adapter (4) on FleetBoard® DispoPilot.guide (2) and align | Positioning pins (A) must be located in the holes (B). | |
7 | Place ball head (6) on adapter (4) and align | Positioning pin (arrow) at adapter (4) must be located in hole at ball head (6). | |
8 | Screw in screws/bolts (7, 8) | ||
9 | Install universal bracket (9) at suitable installation position in vehicle and secure with mounting plate (11) and screws/bolts | The installation position of the universal bracket (9) must be able to permanently hold the weight of the FleetBoard® DispoPilot.guide (2) together with the vehicle bracket (approx. 1 kg). In addition, the driver's view of traffic must not be limited by the installed device. | |
10 | Loosen nut (10) and insert FleetBoard® DispoPilot.guide (2) with ball head (6) in universal bracket (9) | ||
11 | Align FleetBoard® DispoPilot.guide (2) and tighten nut (10) | ||
12 | Install center air vent | ||
| Model 930, 932, 933, 934 | ||
| Model 940, 942, 943, 944, 950, 952, 953, 954 , 970, 972, 974, 975, 976 |