an2910p0002cw
Retrofit pedal pads
ประเภท an · หัวข้อ 29.10 · เวอร์ชัน 0103 · 2020-02-07
ใช้กับ: Model 204.0## (except 204.077) 1# , 204.2## (except 204.277) 1# , 204.3## (except 204.377) 1# except code 950 (AMG sport package) Model 204.9## 1# as of 7/31/12 except code P95 (Interior Sports package)
ไม่มีใน “th” แสดงเป็น อังกฤษ
ตำแหน่ง
กลุ่มฟังก์ชัน 2 Chassis › 29 Pedal assembly › 29.10 Pedals, bearing bracket — ซีรีส์ 204 (รุ่น 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 15 Engine › 15.45 Engine management › 15.45.3 Retrofitting/modification — ซีรีส์ 204 (รุ่น 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 17 Drivetrain/axle › 17.15 Clutch › 17.15.3 Retrofitting/modification — ซีรีส์ 204 (รุ่น 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 21 Brakes/vacuum system/compressed-air system › 21.15 Service brake/vacuum system › 21.15.3 Retrofitting/modification — ซีรีส์ 204 (รุ่น 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
EinPAS 21 Brakes/vacuum system/compressed-air system › 21.16 Parking brake › 21.16.3 Retrofitting/modification — ซีรีส์ 204 (รุ่น 000, 001, 002, 003, 006, 007, 008, 022, 023, 025, 031, 041, 044, 045, 046, 047, 048, 049, 052, 054, 055, 056, 057, 065, 080, 081, 082, 084, 085, 087, 088, 089, 092, 200, 201, 202, 203, 207, 208, 222, 223, 225, 231, 241, 245, 246, 247, 248, 249, 252, 254, 256, 257, 282, 284, 289, 292, 302, 303, 331, 347, 348, 349, 357, 388, 9**)
AN29.10-P-0002CW
| Retrofit pedal pads
| 07.02.2020
|
Model
| 204.0## (except 204.077) 1# , 204.2## (except 204.277) 1# , 204.3## (except 204.377) 1#
|
|
| except code 950 (AMG sport package)
|
Model
| 204.9## 1# as of 7/31/12
|
|
| except code P95 (Interior Sports package)
|
Shown on vehicle with transmission 722
|
1
| Stainless steel pedal cover
|
| 3
| Stainless steel pedal cover
|
| 5
| Brake pedal
|
2
| Stainless steel pedal cover
|
| 4
| Parking brake pedal
|
| B37
| Accelerator pedal sensor
|
| Remove
|
|
|
1
| Remove accelerator pedal sensor (B37)
|
|
|
|
|
| AR30.12-P-1321CW
|
|
|
| The accelerator pedal sensor (B37) with its pedal cover is no longer required.
|
|
2
| Remove pedal rubber support of foot-operated parking brake pedal (4)
| The pedal rubber support of the parking brake pedal (4) is no longer required.
|
|
3
| Remove pedal rubber support of the clutch pedal
| For transmission 711 and 716
|
|
|
|
| The pedal rubber support of the clutch pedal is no longer required.
|
|
4
| Remove pedal rubber support of brake pedal (5)
| The pedal rubber support of the brake pedal (5) is no longer required.
|
|
| Install
|
|
|
5
| Install accelerator pedal sensor (B37) with stainless steel support (3)
|
|
|
|
|
| AR30.12-P-1321CW
|
6
| Attach stainless steel pedal support (1) to parking brake pedal (4) in lower area (arrow B) and invert clockwise over the parking brake pedal (4)
|
Do not use lubricants when installing.
Otherwise the firm seating of the stainless steel pedal assembly (1) will not be assured.
|
|
7
| Attach stainless steel pedal support to clutch pedal in the lower area and invert clockwise over the clutch pedal
| For transmission 711 and 716
|
|
|
|
|
Do not use lubricants when installing.
Otherwise the firm seating of the stainless steel pedal assembly will not be assured.
|
|
8
| Attach stainless steel pedal support (2) to the brake pedal (5) in the lower area (arrow B) and invert clockwise over the brake pedal (5)
|
Do not use lubricants when installing.
Otherwise the firm seating of the stainless steel pedal assembly (2) will not be assured.
|
|
9
| Document retrofitted equipment via vehicle documentation (VeDoc)
| Attach "Stainless steel pedal covers as per AN29.10-P-0002CW" note under field organization texts to design group 29.
|
|
Part no.
| Designation
| Quantity
|
KG99 (siehe EPC)
| Interior compartment equipment
| 1
|
เอกสารที่อ้างถึง
