Engine | 112.951/976 |
Engine | 113.940/943/944/961/980/984 |
Engine | 113.963/967/968/987/988/989/990/991/992/995 |
Engine | 113.964 in model 164.175 |
Engine | 113.971 in model 251.075/175 |
Engine | 166.940/960/961/990/991/995, 668.914/940/941/942 |
Engine | 266.920/940/960/980 in model 169.0/3, 245.2 |
Engine | 271 |
Engine | 629 |
Engine | 646 in model 636, 639 |
Engine | 651 in model 166, 172, 204, 205, 207, 212, 218, 221, 222, 253 |
The sealing surface must be free of anticorrosion agents, free of machining residues, oil and free of grease and free of dust.
The sealing surface must be flat (replace bent components).
Discontinuity of the sealant bead is not permissible.
Do not spread sealing bead.
Component part temperature: At least 7 °C to maximum 25 °C
Sealant temperature: At least 7 °C to maximum 25 °C
Engine 112 oil pan top section
The traced line (1) identifies the sealant path.
The sealant may only be applied to the specified surface in a bead of 2.0 mm (0.5 mm) and it must be processed within a period of 10 min.
P01.45-2051-06
Engine 112 oil pan bottom section
The traced line (2) identifies the sealant path.
The sealant may only be applied to the specified surface in a bead of 2.0 mm (0.5 mm) and it must be processed within a period of 10 minutes.
P01.45-2052-06
Engine 113.963/967/968/987/988/989/990/991/992/995 oil pan top section
The traced line (F) identifies the sealant application.
The sealant must only be applied to the specified surface as a bead with a height and width of 2.0 mm (0.5 mm). The sealant must be processed within 10 min.
P01.45-2423-06
Engine 113.963/967/968/987/988/989/990/991/992/995 oil pan bottom section
The traced line (F) identifies the sealant application.
The sealant must only be applied to the specified surface as a bead with a height and width of 2.0 mm (0.5 mm).
The sealant must be processed within 10 min.
P01.45-2081-06
Engine 113.964/971 oil pan top section
The traced line (F) denotes the sealant path.
The sealant may only be applied to the specified surfaces in the form of a sealant bead with 2.0 mm (0.5 mm) diameter.
The sealant must be processed within 10 min.
P01.45-2186-11
Engine 113.964/971 oil pan bottom section
The traced line (F) denotes the sealant path.
The sealant may only be applied to the specified surfaces in the form of a sealant bead with 2.0 mm ( 0.5 mm) diameter.
The sealant must be processed within 10 min.
P01.45-2187-02
Engine 113.940/943/944/961/980/984 oil pan top section
The traced line in (F) identifies the sealant application.
The sealant may only be applied to the specified surfaces with a bead of 2.0 mm 0.5 mm.
The sealant must be processed within 10 minutes.
P01.45-2012-81
Engine 113.940/943/944/961/980/984 oil pan bottom section
The traced line in (F) identifies the sealant application.
The sealant may only be applied to the specified surfaces with a bead of 2.0 mm 0.5 mm.
The sealant must be processed within 10 minutes.
P01.40-0317-72
Oil pan, engine 266.920/940/960/980, 166.940/960/961/990/991/995, 668.914/940/941/942
Clean sealing surfaces; apply sealant only to the specified lines with a bead of 2.0 mm 0.5 mm.
The oil pan must be fitted within 10 min.
P01.45-2020-05
Engine 271 oil pan
The line (1) identifies the sealant path.
The sealant must only be applied to the specified surface in the form of a bead with a height and width of 2.0 mm 0.5 mm.
The sealant must be processed within 10 min.
P01.45-2118-06
Engine 629 oil pan top section
The traced line (A) identifies the sealant path.
Apply sealant to surfaces as a bead with a width of 1.5 mm (0.5 mm) . The sealant must be processed within 10 min.
P01.45-2228-06
Engine 629 oil pan bottom section
The traced line (A) identifies the sealant path.
Apply sealant to surfaces as a bead with a width of 1.5 mm (0.5 mm) . The sealant must be processed within 10 min.
P01.45-2229-06
Engine 646 oil pan
The traced line (F) identifies the sealant application.
The sealant may only be applied to the specified surfaces with a bead of 2.0 mm 0.5 mm.
The sealant must be processed within 10 min.
S01.45-4501-02
Engine 651
Line (A) identifies the sealant path. Sealant bead diameter: 2 mm. Nozzle diameter: 1.5 mm. Maximum assembly time: 7 min.
P01.45-2326-06