(only CAN version)
After the menu point "Fault memory" is selected, the digits of the codes stored in the control module appear together with the relevant texts.
Current faults appear highlighted in black in the HHT display.
Stored faults appear in the HHT display not highlighted in black.
Procedure in the case of current faults:
Process faults as described in the test program - electrical system.
Procedure in the case of stored faults:
Erase fault memory. Lock vehicle and unlock. Once again read fault memory.
If the fault is again stored, process fault as described in the test program - electrical system.
The stored faults can be read with the HHT at the diagnostic socket with ignition "ON".