AD07.61-P-6001-09E | Crankshaft position sensor - Check ME-SFI ignition system electrics |
| Scope of test | Tester/test connection | Operation/ prerequisite | Specified value | Possible cause/ remedy | ||
1.0 | Left (L5/4) or right (L5/5) crankshaft position sensor |
78 (2.78) 78 (2.78) | N3/11 N3/12 N3/11 N3/12 |
89 (2.89) 89 (2.89) | Check with oscilloscope. Starter: actuate Engine: At idle speed Only perform test with multimeter if oscilloscope is not available. Starter: actuate: Engine: at idle speed: | Signal see > 0.5 V > 7 V Increasing rotational speed, increasing voltage. | 1.1 Teeth on the drive plate |
1.1 | Resistance of L5/4 or L5/5 |
78 (2.78) | N3/11 N3/12 |
89 (2.89) | Ignition: OFF Disconnect coupling 2 from ME-SFI control module (N3/11) or (N3/12). |
(at 20 °C) 600 - 1200 Ω | L5/4 or L5/5 |