ad0761p400003a

Fault code description - ME-SFI - intake air temperature sensor

ประเภท ad · หัวข้อ 07.61 · เวอร์ชัน 0104 · 2003-06-06

ใช้กับ: ENGINES 112.910, 112.911 up to 31.5.00, 112.920, 112.921 up to 31.5.00, 112.923, 112.940 /941 /942 up to 31.5.00, 112.943 ENGINES 113.940 /942 /943 up to 31.5.00, 113.961 ENGINES 112.945, 113.962 up to 30.11.00 in MODEL 463

ไม่มีใน “th” แสดงเป็น อังกฤษ

ตำแหน่ง

กลุ่มฟังก์ชัน 1 Engine › 07 Mixture formation › 07.61 ME fuel injection/ ignition system — ซีรีส์ 463

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.1 Basic information — ซีรีส์ 463

ใช้กับเครื่องยนต์/เกียร์ด้วย: 112 910, 112 911, 112 920, 112 921, 112 923, 112 940, 112 941, 112 942, 112 943, 112 945, 113 940, 113 942, 113 943, 113 961, 113 962

AD07.61-P-4000-03A

Fault code description - ME-SFI - intake air temperature sensor

1

Fault code

2

Fault storage

Activation of malfunction indicator lamp for engine diagnosis (EURO3/4)

or CHECK ENGINE (MIL)

after the end of the test period and faults

after two successive driving cycles with faults

3

Frequency of the test

continuous

4

Checked signal or status

Limits for intake air temperature

5

Fault setting conditions

Lower limit

Upper limit

Test duration

Fault, if signal is less than 0.1 V (corresponds to approx. 300 kΩ and approx. -50 °C)

Fault, if signal is greater than 4.93 V (corresponds to approx. 92 Ω and approx. +150 °C)

approx. 1 s

6

In the event of a fault, driving continues at the substitute value +20 °C. If the signal becomes plausible again, the system changes over to the signal from the intake air temperature sensor.