ar4910p7280tk

Remove / install exhaust system from flange connection

Typ ar · ämne 49.10 · version 0107 · 2011-11-09

Gäller för: ENGINES 271 in MODEL 211

Inte tillgängligt på ”sv”; visas på Engelska.

Placering

Funktionsgrupp 1 Motor › 49 Avgassystem, avgasrening › 49.10 Avgasrör, katalysator, ljuddämpare — Serie 211

EinPAS 15 Motor › 15.40 Avgassystem/avgasefterbehandling › 15.40.41 Grenrör/rör/ljuddämpare/avgasslang — Serie 211

Gäller även motorer/växellådor: 271 ***

AR49.10-P-7280TK

Remove / install exhaust system from flange connection

21.10.11

ENGINES 271 in MODEL 211

Remove / install exhaust system from flange connection

P49.10-2256-08

1 Front exhaust system

2 Bolts

5 Exhaust rubber mount

159 Center muffler

3 Gasket

4 Rear exhaust system

 	Remove/install
 Danger!	Risk of injury to skin and eyes caused by handling hot or glowing objects.	Wear protective gloves, protective clothing and safety glasses.	AS00.00-Z-0002-01A
	Notes on self-locking nuts and bolts		AH00.00-N-0001-01A
1	Raise vehicle with vehicle lift		AR00.60-P-1000T
2	Detach center muffler (159) from front exhaust system (1), for this step unscrew bolts (2)	 Installation: Clean connecting points free of combustion and corrosion residues. Replace seal (3) and bolts (2).
			*BA49.10-P-1006-01K
3	Support rear exhaust system (4) with transmission jack and transmission platform	Transmission jack gotis://H_00.10_01.0
		Transmission plate for passenger cars and commercial vehicles gotis://A_25/35/49_02.0
4	Unhinge rear exhaust system (4) from exhaust rubber mounts (5)	 Use liquid lubricant if necessary.
		 Installation: Check exhaust rubber mount (5) for wear, replace if required.
			*BA49.10-P-1008-01K
		Lubricant paste	*BR00.45-Z-1002-06A
5	Lower rear exhaust system (4)
6	Install in the reverse order
	Checking
7	Check installation position and clearance of exhaust system	 The exhaust system must be mounted free of tension, align exhaust system if required.
 Danger!	Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running	Secure vehicle to prevent it from moving by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.	AS00.00-Z-0005-01A
8	Test run engine and check exhaust system for leaks

 Exhaust system

Number	Designation			Engine 271 in model 211


BA49.10-P-1006-01K	Bolt connecting front exhaust system to center muffler		Nm	20
BA49.10-P-1008-01K	Nut connecting exhaust rubber mount to frame floor		Nm	20

Repair materials

Number	Designation	Order number
BR00.45-Z-1002-06A	Antifriction paste, rubber parts 2.5 kg, DB supply specification 6867.00	A 000 989 01 60

Refererade dokument

ah0000n000101a Information om självlåsande skruvar och muttrar
ar0060p1000t
as0000z000201a Risk för hud- och ögonskador vid hantering av heta eller glödande föremål.
as0000z000501a Olycksrisk föreligger eftersom bilen kan komma i rullning när motorn är i gång. Risk för kläm- och brännskador vid ingrepp under startförloppet eller när motornär i gång.