ar3010p1010fa

Adjusting accelerator control

Typ ar · ämne 30.10 · version 0109 · 2010-03-12

Gäller för: ENGINE 120.982 /983, 606.964

Inte tillgängligt på ”sv”; visas på Engelska.

Placering

Funktionsgrupp 1 Motor › 30 Reglering, system hastighetsreglering › 30.10 Mekanisk reglering

EinPAS 15 Motor › 15.45 Motorstyrning › 15.45.35 Motorreglering

Gäller även motorer/växellådor: 120 982, 120 983, 606 964

AR30.10-P-1010FA

Adjusting accelerator control

10.3.10

ENGINE 120.982 /983, 606.964

Adjusting accelerator control

P30.10-0227-05

6 Accelerator control relay lever

24 Accelerator pedal

29 Adjusting nut

30 Bowden cable

32 Adjusting bolt

a Closed throttle stop

b Wide open throttle stop

B37 Pedal position sensor

S16/7 Kickdown switch

Adjusting accelerator control

P30.10-0268-05

Engine 606.964

6 Accelerator control relay lever

24 Accelerator pedal

29 Adjusting nut

30 Bowden cable

32 Adjusting bolt

a Closed throttle stop

b Wide open throttle stop

B37 Pedal position sensor

S16/7 Kickdown switch

Adjusting

Adjusting closed throttle

1

Check closed throttle stop

Accelerator control relay lever (6) must be touching closed throttle stop (a) of the pedal position sensor (B37). Alter, if necessary, with adjusting bolt (32).

Adjusting wide open throttle

2

With engine switched off, depress accelerator pedal (24) from inside car as far as stop at kickdown switch (S16/7)
(do not operate kickdown switch!)

Accelerator control relay lever (6)
must be touching wide open throttle stop (b) of pedal position sensor (B37); alter, if necessary with adjusting nut (29)

3

Lubricate bowden cable (30) between end pieces and guide piece with anti-corrosion grease

*BR00.45-Z-1006-06A

Repair materials

Number

Designation

Order number

BR00.45-Z-1006-06A

Anti-corrosion grease 40 g / DB supply specification 6834.00

A 001 989 37 51 10