Service Information: Reworking the straightening tool 12 and 13 from set
7221.300
Vrsta si · tema 60.10 · različica 0100 · 2006-03-14
Velja za: MODEL 216, 221
Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.
Umestitev
Funkcijska skupina 3 Nadgradnja › 60 Nadgradnja, splošno › 60.10 Ravnalna miza, garnitura ravnalnih kotnikov — Serija 216 · Serija 221
EinPAS 35 karoserija/okvir/priključni deli › 35.15 meritev/ravnalna miza › 35.15.30 ravnalna miza — Serija 216 · Serija 221
EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 216 · Serija 221
SI60.10-P-0003A
Service Information: Reworking the straightening tool 12 and 13 from set 7221.300
10.3.06
MODEL 216, 221
P60.10-2182-06
Picture 1
ArrowInterference points
P60.10-2183-11
Picture 2
A10 mm
Arrow:Area for reworking
Due to tolerance additions of the body and straightening tool, both components can be contacted at the point in question (see picture 1).
This interference point can be reworked mechanically if required. To do this the mating surfaces (4 pieces) in the interference area should be adapted outwards in the y-direction approx. 5 to 10 mm (see picture 2).
