si2621w0002a

Service Information: Replacement of controller unit and control unit for automatic gear control (AGS)

Vrsta si · tema 26.21 · različica 0100 · 2014-11-05

Velja za: TRANSMISSION 712, 715 in MODEL 950.5/6, 952.5, 954.5 with CODE GE1 (Electronic drive control) TRANSMISSION 712, 715 in MODEL 970, 972, 974, 976 with CODE GE1 (Electronic drive control)

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 26 Mehanski menjalnik › 26.21 Elektronsko krmiljenje pogona (EAS) - samodejna izbira prestave (AG/AGE) - samodejno krmiljenje menjalnika (AGS) — Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**) · Serija 954 (modeli 5**) · Serija 970 · Serija 972 · Serija 974 · Serija 976

EinPAS 17 pogonski sklop/prema › 17.20 menjalnik › 17.20.35 krmilna enota/krmilno ohišje/plošča razdelilnika olja — Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**) · Serija 954 (modeli 5**) · Serija 970 · Serija 972 · Serija 974 · Serija 976

EinPAS 17 pogonski sklop/prema › 17.35 menjalnik/krmiljenje prestav › 17.35.11 krmilnik/rele — Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**) · Serija 954 (modeli 5**) · Serija 970 · Serija 972 · Serija 974 · Serija 976

EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**) · Serija 954 (modeli 5**) · Serija 970 · Serija 972 · Serija 974 · Serija 976

Velja tudi za motorje/menjalnike: 712 ***, 715 ***

SI26.21-W-0002A

Service Information: Replacement of controller unit and control unit for automatic gear control (AGS)

05.09.2014

TRANSMISSION

712, 715 in MODEL 950.5/6, 952.5, 954.5

with CODE GE1 (Electronic drive control)

TRANSMISSION

712, 715 in MODEL 970, 972, 974, 976

with CODE GE1 (Electronic drive control)

In the event of customer complaints that indicate a defect such as, e.g. a short circuit or an electrical fault in the automatic gear control (AGS) control unit, then in the majority of instances, from a technical point of view, it is fully sufficient to replace the automatic gear control (AGS) control unit. Generally the automatic gear control (AGS) controller unit need not be replaced.

If the automatic gear control (AGS) control unit contains hydraulic fluid (Pentosin), then the automatic gear control (AGS) controller unit has to be replaced. This should then be separately noted in the warranty claim message field.