si0940w0003a

Service Information: Wastegate control line

Vrsta si · tema 09.40 · različica 0100 · 2008-12-15

Velja za: MODEL 375, 940, 942, 944 with ENGINE 457.948 MODEL 930, 932 with ENGINE 541.974 /975 /976 /977 /978 /979, 542.962 /963 /964 /965 /969 MODEL 933 with ENGINES 541.974 /976 /978 MODEL 934 with ENGINE 541.974 /975 /976 /977 /978 /979, 542.962 /963 /964 /968

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 09 Vsesavanje zraka, polnjenje › 09.40 Turbopolnilnik — Serija 375 · Serija 930 · Serija 932 · Serija 933 · Serija 934 · Serija 940 · Serija 942 · Serija 944

EinPAS 15 motor › 15.30 vsesavanje zraka/polnjenje › 15.30.32 napeljava/gibka cev/ventil — Serija 375 · Serija 930 · Serija 932 · Serija 933 · Serija 934 · Serija 940 · Serija 942 · Serija 944

EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 375 · Serija 930 · Serija 932 · Serija 933 · Serija 934 · Serija 940 · Serija 942 · Serija 944

Velja tudi za motorje/menjalnike: 457 948, 541 974, 541 975, 541 976, 541 977, 541 978, 541 979, 542 962, 542 963, 542 964, 542 965, 542 968, 542 969

SI09.40-W-0003A

Service Information: Wastegate control line

11.12.08

MODEL 375, 940, 942, 944 with ENGINE 457.948

MODEL 930, 932 with ENGINE 541.974 /975 /976 /977 /978 /979, 542.962 /963 /964 /965 /969

MODEL 933 with ENGINES 541.974 /976 /978

MODEL 934 with ENGINE 541.974 /975 /976 /977 /978 /979, 542.962 /963 /964 /968

Service Information: Wastegate control line

W09.40-1198-11

Shown on engine 541.9

1 Turbocharger

2 Wastegate control line

We would like to point out that the connection of the wastegate control line (2) on the turbocharger (1) can loosen due to pre-tension losses or settling properties of the sealing rings.

Should this be the case the boost pressure limitation via the wastegate control does not function.

Therefore on the engines listed the connection of the wastegate control line (2) must be checked for tight seating during the maintenance service.

A connection which has loosened can be sealed with copper sealing rings. For this purpose, the sealing rings listed in the Parts Ordering Note table should be used as an alternative.

Aluminum sealing rings must not be installed.

Sealing the wastegate control line (2) can be invoiced with operation no. 02 68 61.

Turbocharger

Number

Designation

Engine
457.9

BA09.40-N-1009-01M

Banjo bolt, wastegate control line to turbocharger

Nm

10

Turbocharger

Number

Designation

Engine
541.9

Engine
542.9

BA09.40-N-1013-01C

Banjo bolt, wastegate control line to turbocharger

Nm

10

10

Parts ordering notes

Part no.

Designation

Quantity

n007603 008109

Sealing ring

2

n000000 001389

Sealing ring

2