si0708d0001a

Service information on control units of mixture formation

Vrsta si · tema 07.08 · različica 0102 · 2005-03-18

Velja za: ENGINE 602.98 in MODELS 901, 902, 903, 904

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 07 Priprava mešanice › 07.08 Krmilniki — Serija 602 (modeli 98*) · Serija 901 · Serija 902 · Serija 903 · Serija 904

EinPAS 15 motor › 15.45 krmilna elektronika motorja › 15.45.11 krmilnik/rele — Serija 602 (modeli 98*) · Serija 901 · Serija 902 · Serija 903 · Serija 904

EinPAS 45 podatki/informacije › 45.20 informacije/ukrepi › 45.20.20 servisne informacije — Serija 602 (modeli 98*) · Serija 901 · Serija 902 · Serija 903 · Serija 904

SI07.08-D-0001A

Service information on control units of mixture formation

8.11.99

ENGINE 602.98 in MODELS 901, 902, 903, 904

Modification notes

8.11.99

Supersedes STIN 07.12D006 dated 13.1.98

Variant coding of the EDC control unit for engine 602.98.

When replacing the EDC control unit, always remember to enter the correct variant coding as per the Sprinter Diagnosis Manual.

Problems if this is not observed - example of ADR function:

If a variant coding for working speed control is set for a control unit, although this control unit does not have this data record, the electronics will run in an undefined memory and program area each time the ignition is switched on.

The program is therefore no longer reprogrammable and must be replaced.

When entering the variant coding, it is important to wait for the run-on period to end after the request from Star Diagnosis - ignition OFF - and to only switch on the ignition when Star Diagnosis requests to do so.