MODEL | 221 |
Check values for gaps |
Number | Designation | Model 221 | |||
BE60.00-P-1001-01R | Gap dimension | Engine hood to fender | Dimension "A" | mm | 3,5 (0,5) |
Engine hood to headlamp | Dimension "B" | mm | 3,5 (0,5) | ||
Radiator grille/bumper | Dimension "C" | mm | 5 (1) | ||
Engine hood to bumper | Dimension "P" | mm | 5 (1,5) | ||
Bumper to headlamp | Dimension "Q" | mm | 3,5 (0,5) | ||
Bumper to fender | Dimension "R" | mm | 3,5 (0,5) | ||
Picture | |||||
BE60.00-P-1002-01R | Gap dimension | Front door to A-pillar | Dimension "D" | mm | 4,5 (0,5) |
Front door to fender | Dimension "E" | mm | 4 (0,5) | ||
Front door to rear door | Dimension "F" | mm | 4,5 (0,5) | ||
Trim strip at front door to roof frame | Dimension "G" | mm | 4,5 (0,5) | ||
Trim strip at rear door to roof frame | Dimension "H" | mm | 4,5 (0,5) | ||
Rear door to side piece, bottom | Dimension "I" | mm | 4,5 (0,5) | ||
Front door cover to rear door cover | Dimension "S" | mm | 4,5 (0,5) | ||
Picture | |||||
BE60.00-P-1003-01R | Gap dimension | Trunk lid to rear fender, top | Dimension "J" | mm | 4 (0,5) |
Trunk lid to taillamp | Dimension "K" | mm | 4 (0,5) | ||
Trunk lid to bumper | Dimension "L" | mm | 5,5 (1,5) | ||
Rear fender to taillamp | Dimension "M" | mm | 2,5 (0,5) | ||
Trunk lid license plate panel to rear lamp unit | Dimension "N" | mm | 4 (0,5) | ||
Picture | |||||
BE60.00-P-1004-01R | Gap dimension | Fuel filler flap | Dimension "O" | mm | 3,5 (0,5) |
Picture | |||||
BE60.00-P-1005-01R | Gap dimension | Center door to front door | Dimension "T" | mm | 4,5 (0,5) |
Center door to rear door | Dimension "U" | mm | 4,5 (0,5) | ||
Trim strip of center door to roof frame | Dimension "V" | mm | 4,5 (0,5) |