az8285w100011b

Enabling the FleetBoard telematics platform in the vehicle

Vrsta az · tema 82.85 · različica 0202 · 2014-02-14

Velja za: MODEL 375.3 with BODY 375.820 MODEL 375.4 with BODY 375.860 MODEL 940, 942, 943, 944 with BODY 944.890 MODEL 950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890 MODEL 970, 972, 974, 975, 976 with BODY 972.890

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 82 Električni sistem, nadgradnja › 82.85 Navigacijski in komunikacijski sistemi — Serija 375 (modeli 3**, 4**, 820, 860) · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 31 komunikacija/informacije/razvedrilo › 31.20 sistem za upravljanje voznega parka/določanje lokacije › 31.20.3 naknadna vgradnja/predelava — Serija 375 (modeli 3**, 4**, 820, 860) · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

AZ82.85-W-1000-11B

Enabling the FleetBoard telematics platform in the vehicle

MODEL

375.3 with BODY 375.820

MODEL

375.4 with BODY 375.860

MODEL

940, 942, 943, 944 with BODY 944.890

MODEL

950.5/6, 952.5/6, 953.6, 954.5 with BODY 940.890

MODEL

970, 972, 974, 975, 976 with BODY 972.890

When a FleetBoard® control unit is retrofitted, the telematics must be enabled with the diagnostic system. To this end, the menu specified items in the chronologically listed systems must be selected and the changes that are described must be carried out.

1

Connect diagnostic system.

2

Start "XENTRY".

3

Select brand selection "Mercedes-Benz".

4

Select category selection "Truck".

5

Select "Automatic model series access".

6

Select "Diagnosis application".

7

Select system recognition.

8

Select menu item "Control unit direct entry".

9

Select instrument (INS).

Menu item "Control unit adaptations"

"Parameterization" menu item

Menu item "Control unit list (IES-CAN bus control units)"

Menu item "TP telematics platform"

Set "TP telematics platform" to "PRESENT" and confirm with "F3" key

10

Select parameterizable special module (PSM).

Menu item "Control unit adaptations"

"Parameterization" menu item

Menu item "General parameter set"

Menu item "900/Telematics service"

Menu item "All parameters"

Menu item "900.530/Communications interface (KOM)"

Set "Communications interface (KOM)" to "ACTIVE" and confirm with "F3" key

Return to menu item "General parameter set" by repeatedly pressing the "F1" key

Menu item "General parameter set"

Menu item "910/Vehicle equipment"

Menu item "All parameters"

Menu item "910.500/gear ratio in highest gear"

Check gear ratio in highest gear, adjust if necessary and confirm with "F3" key

11

Select maintenance system (WS).

Menu item "Control unit adaptations"

"Parameterization" menu item

Menu item "Fuel consumption"

Menu item "Fuel consumption measurement"

Set "Fuel consumption measurement" to "ACTIVE" (not to telematics) and confirm with "F3" key

12

End procedure and remove diagnostic system.