az8264d000107a

Retrofitting CD changer in seat frame

Vrsta az · tema 82.64 · različica 0100 · 2006-10-31

Velja za: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30 with CODE (ET8) Sound 30 Auto-Pilot-System (APS)

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 82 Električni sistem, nadgradnja › 82.64 CD-izmenjalnik — Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

EinPAS 31 komunikacija/informacije/razvedrilo › 31.67 predvajanje medijev/nosilci podatkov › 31.67.3 naknadna vgradnja/predelava — Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

AZ82.64-D-0001-07A

Retrofitting CD changer in seat frame

Model 901, 902, 903, 904, 905 with CODE EF6, EF7, ET8 (Radio Sound 20, 30 or 30 APS)

Repair materials

Number

Designation

Order number

BR00.45-Z-1014-01A

Adhesive tape

A 000 989 98 85

Retrofitting CD changer in seat frame

D82.64-1104-01

1 Install retaining brackets (1) on CD changer (2) with two screws each.

Retrofitting CD changer in seat frame

D82.64-1105-01

2 Position CD changer on floor of seat frame and align with side access opening.

When aligning CD changer observe removal and installation of CD magazine. Ensure that there is sufficient space in the area of the side access opening.

3 Mark two mounting holes each for retaining brackets on the floor.

4 Drill cab floor with 3.5 mm bit at marked points.

5 Screw CD changer to vehicle floor with sheet metal screws.

Coat threads of sheet metal screws with sealant before screwing in to protect against water and corrosion.