Remove/install bottom parts of noise encapsulation

AR94.30-P-5300TX

8.4.05

MODEL 219.322 with ENGINE 642

P94.30-2014-05

Bottom pat of front noise encapsulation

1 Bolt

2 Rubber lip

P94.30-2015-05

Bottom part of middle noise encapsulation

1 Bolt

P94.30-2016-05

bottom part of rear noise encapsulation

1 Bolt

 	Remove/install
 Danger!	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
1	Raise vehicle with lifting platform		AR00.60-P-1000TX
2	Take out screws (1) and take off bottom parts of noise encapsulation	 Observe removal sequence for noise encapsulation bottom sections: First remove bottom part of middle noise encapsulation.
		 Installation: Install bottom part of front noise encapsulation in such a way that the rubber lips (2) are concealed by the bumper.
3	Install in the reverse order