ar9140l0683va

Remove, replace and install rear center seat belt

Vrsta ar · tema 91.40 · različica 0301 · 2009-11-10

Velja za: MODEL 414.700

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 91 Sedeži, ležišča, zadrževalni sistem › 91.40 Varnostni pasovi, zateznik varnostnih pasov — Serija 414 (modeli 700)

EinPAS 27 pasivna varnost/zadrževalni sistemi › 27.17 zadrževalni sistem › 27.17.20 varnostni pas/zaklep varnostnega pasu/zateznik varnostnega pasu — Serija 414 (modeli 700)

AR91.40-L-0683VA

Remove, replace and install rear center seat belt

20.8.01

MODEL 414.700

Remove, replace and install rear center seat belt

L91.40-0004-06

1 Belt

2 Belt end fitting

3 Bolt

4 Belt guide

5 Cover

6 Bolts

Modification notes

22.1.02	Value modified from 35 Nm to 30 Nm	Value in row BA91.40-P-1001-01E changed for model 414.700	*BA91.40-P-1001-01E
22.1.02	Value modified from 35 Nm to 30 Nm	Value in row BA91.40-P-1005-01E changed for model 414.700	*BA91.40-P-1005-01E

 	Remove/install
1	Unscrew screws (6) and remove cover (5)
2	Remove belt end fitting (2)		*BA91.40-P-1001-01E
3	Detach upper and lower area of backrest cover (arrows) from the clip groove
4	Unclip belt guide (4) and remove
5	Guide belt (1) through rear seat backrest
6	Unscrew screw (3) behind the seat cushion and remove automatic belt retractor	 Installation:Ensure correct seating in the guide.
			*BA91.40-P-1005-01E
7	Install in the reverse order
8	Check the function of the seat belt

 Seat belts/emergency tensioning retractors

Number	Designation		Model 414.700


BA91.40-P-1001-01E	Belt end fitting screw	NM	30
BA91.40-P-1005-01E	Bolt to rear inertia reel	NM	30