Remove/install seat control module

Vrsta ar · tema 91.29 · različica 0200 · 2002-03-22

Velja za: MODELS 950, 952, 953, 954 with CODE (SG2) "Isringhausen" standard passenger suspension seat with CODE (SG5) "Isringhausen" standard driver suspension seat MODELS 970, 972, 974, 975, 976 with CODE (SG2) "Isringhausen" passenger standard suspension seat with CODE (SG5) "Isringhausen" standard driver suspension seat

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

AR91.29-W-1500B

21.4.97

MODELS 950, 952, 953, 954
with CODE (SG2) "Isringhausen" standard passenger suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat

MODELS 970, 972, 974, 975, 976
with CODE (SG2) "Isringhausen" passenger standard suspension seat
with CODE (SG5) "Isringhausen" standard driver suspension seat

W91.29-0011-06

1 Screw

2 Ground cable

3 Module support

4 Nut

5 Serrated washer

6 Connector

7 Boot

A8 Driver-side suspension seat control module

A34 Front passenger side suspension seat control module

Modification notes

28.2.02

Tightening torque not applicable

Step 5

 	Remove, Install
1	Switch off ignition
2	Remove seat cushion		AR91.10-W-3310C
3	Work loose CV boot (7) at top	 Move seat to highest position and secure it from being lowered. Move seat inclination to highest position.
4	Disconnect plug connector (6)
5	Unscrew nut (4)	 The nut is located on the underside of the module support (3).
		 Installation: Use new toothed lock washer (5).
6	Undo screws (1) and remove suspension seat control module (A8/A34)	 Push module support (3) downwards and remove suspension seat control module.
		Installation: when replacing the control module, the ground lead (2) of the plug (6) to the seat frame must be retrofitted if it is not already there.	AR91.29-W-1500-01A
7	Install in the reverse order

Remove/install seat control module

Povezani dokumenti