ar9112p1700f

Removing and installing rear seat and rear backrest

Vrsta ar · tema 91.12 · različica 0101 · 1997-04-24

Velja za: MODEL 210.0

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 91 Sedeži, ležišča, zadrževalni sistem › 91.12 Zadnji sedeži — Serija 210 (modeli 0**)

EinPAS 37 notranja oprema › 37.27 sedež zadaj › 37.27.42 sedežno naslonjalo/vzglavnik — Serija 210 (modeli 0**)

AR91.12-P-1700F

Removing and installing rear seat and rear backrest

15.12.94

MODEL 210.0

Removing and installing rear seat and rear backrest

P91.10-0292-09

1 Rear seat cushion

2 Release lever

3 Bolts at bottom of rear backrest frame

4 Rear backrest

5 Insulating mat

Removal, installation

1

Pull up both release levers (2) and lift rear seat cushion (1)

2

Remove rear seat cushion (1)

Installation:
When reinstalling expose lap belt and belt buckles. Insert rear seat cushion into the two crash retainers at the rear and allow to catch at front. Pay attention to guide pins (4 each).

3

Unscrew bolts (3) in seat belt end fitting at bottom on left and right sides and in rear backrest frame

4

Lift rear backrest (4) up and remove

Installation:
Before installing position insulating mat; expose guide pins for rear seat cushion.
When installing insert catches (arrows) into top of rear wall; expose rear seat belts.

5

Reinstall in opposite order