AR91.10-D-1110B | Remove/install seat backrest lock | 28.11.05 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
D91.10-0055-09
1 Bolt
2 Inner panel
3 Toothed lever
4 Locking lever
5 Circlip
11 Cover
12 Seat belt
13 Bolt
14 Grip
15 Spring
6 Lever
7 Nut
8 Shaft
9 Grip
10 Cover
| Removing | ||
1 | Remove seat backrest | ||
2 | Remove cover (10) | ||
3.1 | Push back catches (arrows) in grip (14) for seat cushion adjustment and remove upper section of grip | Vehicle with deluxe seat. | |
4 | Unscrew bolts (1) of cover (11) and remove cover (11) | Cover jams in catch lug. | |
5 | Unscrew seat belt (12) on seat frame | | |
6 | Detach grip (9) for backrest lock. | ||
7 | Remove lever (6) for seat backrest lock | Note the installation position. | |
8 | Remove circlip (5) for shaft of backrest lock | ||
9 | Remove shaft (8) for backrest lock | ||
10 | Slide spring (15) for backrest using assembly lever in direction of arrow | ||
11 | Undo nuts (7) for backrest lock | | |
12 | Remove inner panel (2) of backrest lock | ||
13 | Check parts of toothed lever (3) and locking lever (4) of backrest lock for signs of wear, replace damaged parts | Note installation position of separate parts. | |
Install in the reverse order |
Seat belts/emergency tensioning retractors
Number | Designation | Models | Models | |
BA91.40-N-1001-01B | Bolt, seat belt to seat frame | Nm | 35 | 35 |
Front seats