ar8840p1000f

Opening engine hood, moving to upright position, closing

Vrsta ar · tema 88.40 · različica 0104 · 1999-02-15

Velja za: MODEL 210, 208.3 /4

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 88 Priključni deli, zunanje lopute › 88.40 Pokrov motorja, sprednji pokrov — Serija 208 (modeli 3**, 4**) · Serija 210

EinPAS 35 karoserija/okvir/priključni deli › 35.36 kapa/loputa/pokrov › 35.36.30 pokrov motorja — Serija 208 (modeli 3**, 4**) · Serija 210

AR88.40-P-1000F

Opening engine hood, moving to upright position, closing

15.12.94

MODEL 210, 208.3 /4

Opening engine hood, moving to upright position, closing

P88.40-0235-06

Illustrated on model 210

1 Lever

2 Handle

3 Locking lever

4 Edges (engine hood)

Opening

Danger!

Risk of injury from fingers being pinched or jammed when removing and installing and aligning hoods, doors, trunk lids/tailgates and sliding roof

When moving components ensure that no body parts or limbs are in the area of motion.

AS00.00-Z-0011-01A

1

Pull lever (1) on left below instrument panel to release engine hood

Handle (2) comes out of radiator cowl, lift engine hood slightly.

2

Pull handle (2) out of grille until it reaches the stop and open engine hood

Do not lift with handle.
Ensure that windshield wiper arm is not folded toward front.

Moving to upright position

3

Pull engine hood in closing direction, press locking lever (3) on right engine hood hinge in direction of arrow and move engine hood to upright position.

A locking lever (3) is located only on the right engine hood hinge.

Closing

4

Press locking lever (3) on right engine hood hinge in direction of arrow and close engine hood until locking lever (3) engages.

5

Close engine hood.

Position hands on edges (4) only. Check locking function after closing engine hood, for this purpose pull engine hood upward with jerk.

Povezani dokumenti