ar8840d3000na

Removing and installing engine hood

Vrsta ar · tema 88.40 · različica 0107 · 2003-09-17

Velja za: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODELS 690.6

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 88 Priključni deli, zunanje lopute › 88.40 Pokrov motorja, sprednji pokrov — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 35 karoserija/okvir/priključni deli › 35.36 kapa/loputa/pokrov › 35.36.30 pokrov motorja — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

AR88.40-D-3000NA

Removing and installing engine hood

16.1.01

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 690.6

Removing and installing engine hood

D88.40-1101-06

1 Engine hood

2 Hood support

3 Fuse

4 Spring

5 Hinge

6 Collar nuts

Removal:

1

Remove retainer (3) and hood support (2) with spring (4) from guide on engine hood (1).

Support engine hood (1) to prevent damage. Pay attention to installation position of spring (4).

2

Unscrew collar nuts (6) from hinge (5) and remove engine hood (1)

Installation

3

Position engine hood (1) on hinges (5).

Only fit collar nuts (6), do not tighten

4

Install spring (4), insert hood support (2) into guide on engine hood (1) and mount new retainer (3).

5

Adjust engine hood

AR88.40-D-3020A

*BA88.40-N-1001-01A

6

Grease hinges (5).

Engine hood

Number

Designation

Models
690.6, 901, 902, 903, 904, 905

Models
WD1/WD2/
WD3/WD6/
WD7/XD1/
XD2/XD3/
XD4/XD5/
XD6/XD7/
YD1/YD2/
YD3/YD4/
YD5/YD6/
YD7

BA88.40-N-1001-01A

Collar nut for engine hood on hinge

Nm

23

23

Povezani dokumenti