AR83.70-D-5302G | Removing and installing stationary heater unit | 16.12.97 |
MODEL 901.06#, 902.06# /07#, 903.06# /07#, 904.06# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation B3L-C compact
MODEL 901.36# /37# /46#, 902.36# /37# /46# /47#, 903.36# /37# /46# /47#, 904.36# /46# ## as of 753731 as of 3.11.97 with CODE (H11) Hot air auxiliary heater
Heater designation D3L-C compact
D83.70-0180-06
1 Mounting clamp
2 Hot air hose
3 Mounting clamp
4 Fresh air hose
5 Mounting clamp
6 Fuel line
7 Hex. head bolt
8 Hex. head bolt
9 Connector
10 Connector
11 Heater
| Removal, installation | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation. | Do not start up or operate stationary heaters, auxiliary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
1 | Loosen mounting clamp (1) and pull off hot air hose (2) | ||
2 | Loosen mounting clamp (3) and pull off fresh air hose (4) | ||
Danger! | Fuel vapors present an explosion hazard. Fuel vapors are toxic when inhaled or absorbed. Contact with fuel can cause eye and skin injury. | Fire, open lights and smoking prohibited. Avoid sparks. Fill and store fuel only in containers intended for this purpose and marked accordingly. Wear protective clothing when handling fuel. | |
3 | Loosen hose clamp (5) and pull off fuel line (6) | Catch fuel running out. | |
4 | Support heater (11) | ||
5 | Disconnect connectors (9, 10) | ||
6 | Unscrew hex. head bolts (7, 8) on both sides | ||
7 | Lower heater (11) and lift out | ||
8 | Install in opposite order |