ar8210w4729a

Remove/install xenon ballast

Vrsta ar · tema 82.10 · različica 0102 · 2019-12-04

Velja za: Model 374.5 with body 374.860 with code LG1 (Xenon headlamps) Model 374.6 with body 374.870 with code LG1 (Xenon headlamps) Model 374.6 with body 944.890 with code LG1 (Xenon headlamps) Model 375.3 with body 375.820 with code LG1 (Xenon headlamps) Model 375.4 with body 375.860 with code LG1 (Xenon headlamps) Model 940, 942, 943, 944 with body 944.890 with code LG1 (Xenon headlamps) Model 950.5/6, 952.5/6, 953.6, 954.5 with body 940.890 with code LG1 (Xenon headlamps) Model 958.2 with body 958.870 with code LG1 (Xenon headlamps) Model 958.4 with body 958.880 with code LG1 (Xenon headlamps)

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 82 Električni sistem, nadgradnja › 82.10 Zunanje luči — Serija 374 (modeli 5**, 6**, 860, 870) · Serija 375 (modeli 3**, 4**, 820, 860) · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 958 (modeli 2**, 4**, 870, 880)

EinPAS 30 naprava za razsvetljavo › 30.15 zunanja osvetlitev › 30.15.11 krmilnik/rele — Serija 374 (modeli 5**, 6**, 860, 870) · Serija 375 (modeli 3**, 4**, 820, 860) · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 958 (modeli 2**, 4**, 870, 880)

AR82.10-W-4729A

Remove/install xenon ballast

20.11.2019

Model	374.5 with body 374.860
	with code LG1 (Xenon headlamps)
Model	374.6 with body 374.870
	with code LG1 (Xenon headlamps)
Model	374.6 with body 944.890
	with code LG1 (Xenon headlamps)
Model	375.3 with body 375.820
	with code LG1 (Xenon headlamps)
Model	375.4 with body 375.860
	with code LG1 (Xenon headlamps)
Model	940, 942, 943, 944 with body 944.890
	with code LG1 (Xenon headlamps)
Model	950.5/6, 952.5/6, 953.6, 954.5 with body 940.890
	with code LG1 (Xenon headlamps)
Model	958.2 with body 958.870
	with code LG1 (Xenon headlamps)
Model	958.4 with body 958.880
	with code LG1 (Xenon headlamps)

Remove/install xenon ballast

1	Headlamp unit
2	Screw
3	Turn signal lamp

W82.10-1076-11

Remove/install xenon ballast

4	Screw
5	Setting screws

W82.10-1077-11

Remove/install xenon ballast

6	Rubber cap
7	Xenon ballast

W82.10-1078-11

Remove/install xenon ballast

7	Xenon ballast
8	Screw

W82.10-1079-11

 	Remove/install
 Danger	Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)	Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.	AS00.00-Z-0035-01A
 Danger	Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds.	Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area.	AS82.10-Z-0001-01A
1	Switch off ignition and exterior lights
2	Unscrew bolt (2) and remove cover above lamp unit (1)
3	Remove screw/bolts (4)
4	Remove turn signal lamp (3)	Model 374, 375, 940, 942, 943, 944, 950, 952, 953, 954	AR82.10-W-4725B
5	Pivot out lamp unit (1)
6	Remove screws (8) and remove xenon electrical ballast (7)
7	Install in the reverse order
8	Perform function test

Povezani dokumenti