ar8210d1202b

Remove/install headlamp unit bulbs

Vrsta ar · tema 82.10 · različica 0105 · 2003-09-15

Velja za: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 82 Električni sistem, nadgradnja › 82.10 Zunanje luči — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 30 naprava za razsvetljavo › 30.15 zunanja osvetlitev › 30.15.40 sprednja luč — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

AR82.10-D-1202B

Remove/install headlamp unit bulbs

13.10.98

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Remove/install headlamp unit bulbs

D82.10-0001-05

1, 3 Locking arm

2, 4, 10 Tensioning clamp

5 Fog lamp bulb

6 Housing cover

7 Low beam bulb

8 Side light bulb

9 Main beam bulb

11 Turn signal bulb with holder

Remove/install

1

Open engine hood

2

Open locking arm (1, 3) at rear of headlamp unit and take off housing cover (6)

Do not touch the glass of the bulbs, instead use a soft cloth that is free of grease.

3.1

Open retaining clip (2), take out bulb (7) and unplug electrical connection

Low beam bulb.

3.2

Pull out holder, pull bulb (8) out of seat

Standing lamp bulb.

3.3

Open tensioning clamp (4), take out bulb (5) and unplug electrical connection

Fog lamp bulb.

3.4

Open tensioning clamp (10), take out bulb (9) and unplug electrical connection.

High beam bulb.

4

Install in reverse sequence.

Installation: Insert bulbs into the guide slots provided.