Adjust installation depth of hinged door

Vrsta ar · tema 72.15 · različica 0108 · 2002-09-05

Velja za: MODEL 901, 902, 903, 904, 905 MODEL 690.6

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 72 Vrata › 72.15 Vrtljiva vrata — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

EinPAS 35 karoserija/okvir/priključni deli › 35.35 vrata › 35.35.40 sprednja vrata — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

EinPAS 35 karoserija/okvir/priključni deli › 35.35 vrata › 35.35.41 sredinska vrata — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

EinPAS 35 karoserija/okvir/priključni deli › 35.35 vrata › 35.35.43 zadnja krilna vrata — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

EinPAS 35 karoserija/okvir/priključni deli › 35.35 vrata › 35.35.46 zadnja vrata — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904 · Serija 905

AR72.15-D-1021-02A

Adjust installation depth of hinged door

 Hinged doors

Number	Designation		Model 690.6, 901, 902, 903, 904, 905


BA72.15-N-1002-01A	Screw for outside rearview mirror on hinged door	Nm	25
BA72.15-N-1007-01A	Screw for door hinge on hinged door	Nm	25
BA72.15-N-1013-01A	Screw for locking bolt on B-pillar	Nm	25

D72.15-0015-01

A B-pillar

1 Loosen Torx screws (2).

2 Adjust installation depth by horizontally adjusting striker pin.

 Adjust door flush to max. 1 mm extension.

Rotary tumbler should engage in center of striker pin

3  Tighten Torx screws (2).

D72.15-0017-01

B A-pillar

 Adjust only if door extends too far outside at upper A-pillar.

Unscrew outside rearview mirror.

Loosen upper hinge and shim with 1 mm thick shop-made stainless steel plate (as shown in drawing)

Tighten hinge and screw on mirror.