D68.10-1132-02
1 Air vent
2 Connector
S1 Exterior lamp switch
D68.10-1131-02
| Remove/install | ||
1 | Unclip paneling from A-pillar | ||
2 | Remove paneling below air vent (1). | Unscrew bolt at bottom and pull out paneling downward. | |
3 | Unscrew bolts from air vent (1) and remove air vent | ||
4 | Disconnect connector (2) from rotary light switch (S1) | Only on driver side | |
5 | Disconnect connector from headlamp range controller | Only on driver side, except with code (LG0) Bi-xenon headlamp and code (CE2) Rear air suspension. | |
6 | Install in the reverse order |