Welding spot milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1004-03A | Body saw (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
W65.20-1025-09
1 Expose spot welds in areas A and B and cut out.
2 Cut along dotted lines to reach welding points in
areas C and D.
3 Remove sections.
4 Expose spot welds in areas C and D and cut out.
W65.20-1026-07
5 Expose spot welds in areas E and F and cut out.
6 Take off roof frame.
W65.20-1027-07
7 Grind connection surfaces down to bare metal on both sides in areas G and H.
8 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint.