Welding spot milling cutter
201 589 00 51 00
Commercially available tools
Number | Designation | |
WH58.30-Z-1002-01A | Ball cutter, dia. 12 mm | |
WH58.30-Z-1006-01A | Vario Drill WS 91 spot weld removing tool | |
WH58.30-Z-1002-02A | Hole punching pliers, dia. 7 mm | |
WH58.30-Z-1001-03A | Round wire brush, braided, dia. 70 mm | |
WH58.30-Z-1021-04A | Cutting disk, dia. 65 mm, 80 m/s (max. 23,500 rpm) | |
WH58.30-Z-1024-04A | Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm) | |
WH58.30-Z-1001-40A | Tarp (fire-resistant) |
Workshop equipment
WE58.40-Z-1001-03A | Drill (electric/pneumatic) |
WE58.40-Z-1003-03A | Angle grinder (electric/pneumatic) |
WE58.40-Z-1005-03A | Wet/dry vacuum cleaner |
Repair materials
Number | Designation | Order number |
BR00.45-Z-1001-07A | Zinc dust paint suitable for spot welding | A 000 986 34 42 |
W65.10-1051-09
1 Expose spot welds in areas A to F and cut out.
Expose spot welds in areas A and C from inside of vehicle and cut out.
2 Expose spot welds in areas G to J from inside of vehicle and cut out.
3 Expose spot welds in areas K to O and cut out.
Completely drill spot welds in area K.
4 Remove damaged side roof paneling.
W65.10-1049-09
5 Grind spot welding flanges down to bare metal on both sides in shaded areas and coat insides of spot welding flanges with zinc dust paint.
6 Grind connection surfaces down to bare metal in
areas P to U.