Welding in right side wall paneling bottom section
Commercially available tools
Number
Designation
WH58.30-Z-1001-40A
Tarp (fire-resistant)
Workshop equipment
WE58.40-Z-1001-02A
Inert gas welder
WE58.40-Z-1002-02A
Spot welder
WE58.40-Z-1003-02A
Multifunction device
D63.10-0036-11
1 Weld right side wall paneling bottom section (1) to sheet metal strip , arrows).
D63.10-0037-11
2 Weld right side wall paneling bottom section (1) to side wall paneling upper section (19), outer corner pillar paneling (5) and front paneling (14) , arrows).
D63.10-0038-11
To prevent sheet metal strips from distorting hold steel or copper block against side wall paneling from outside. Ensure that block (approx. 25 mm x 25 mm x 200 mm) makes contact over entire surface.
3 Weld right side wall paneling bottom section (1) to side wall inner section (10) ( or , arrows).
D63.10-0014-01
4 Weld right side wall paneling bottom section (1) to longitudinal member and wheelhouse ( , arrows).
D63.10-0015-01
5 Weld right side wall paneling bottom section (1) to rear longitudinal member and wheelhouse ( , arrows).
