ar6230d000102b

Preparing connection points for front frame cross member

Vrsta ar · tema 62.30 · različica 0102 · 2006-07-26

Velja za: MODEL 901.6, 902.6, 903.6, 904.6, 905.6, 690.6

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 3 Nadgradnja › 62 Sprednji del vozila in sprednja stena › 62.30 Prečni nosilec in ojačenje spredaj — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 35 karoserija/okvir/priključni deli › 35.30 sprednji del vozila › 35.30.35 nosilci/okrov kolesa — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

AR62.30-D-0001-02B

Preparing connection points for front frame cross member

Preparing connection points for front frame cross member

201 589 00 51 00

Spot weld miller

Commercially available tools

Number

Designation

WH58.30-Z-1002-01A

Ball cutter, dia. 12 mm

WH58.30-Z-1006-01A

Vario Drill WS 91 spot weld removing tool

WH58.30-Z-1001-03A

Round wire brush, braided, dia. 70 mm

WH58.30-Z-1024-04A

Abrasive disk, dia. 115 mm, 80 m/s (max. 13,250 rpm)

WH58.30-Z-1001-40A

Tarp (fire-resistant)

Workshop equipment

WE58.40-Z-1001-03A

Drill (electric/pneumatic)

WE58.40-Z-1002-03A

Straight grinder (electric/pneumatic)

WE58.40-Z-1003-03A

Angle grinder (electric/pneumatic)

WE58.40-Z-1004-03A

Body saw (electric/pneumatic)

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner

Preparing connection points for front frame cross member

D62.30-1107-01

1 Grind off sheet metal remains (11) from towing lug (9).

2 Cut spot welds out of sheet metal remains (11) (arrows).

3 Remove sheet metal remains (11) from side rail (12).

Right longitudinal frame member

Preparing connection points for front frame cross member

D62.30-1124-01

Left longitudinal frame member

Preparing connection points for front frame cross member

D62.30-1108-01

4 In mount of towing lug (9) drill 3 holes, Ø 10 mm (arrows).

5 Grind off areas around the bores on both sides and coat with zinc dust paint.

Right longitudinal frame member

Preparing connection points for front frame cross member

D62.30-1125-01

Left longitudinal frame member

Preparing connection points for front frame cross member

D62.30-1127-10

6 Hold reinforcing bracket in installation position against side rail (12) and copy contours over to side rail (12).

7 Grind off side rail (12) in marked area and coat with zinc dust paint.

A Side rail inner side

B Side rail outer side