S60.30-0039-09
1 | Lock cylinder | 3 | Linkage rod | |
2 | Lock | 4 | Screw |
Warning | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | |
| Remove | ||
1 | Remove existing detachable parts | Depending on the equipment variant and/or installed body, detachable parts may be available in addition. | |
2 | Remove inner cover on dropside | ||
3 | Remove linkage (3) from lock cylinder (1) | To do this, release lock (2). | |
4 | Remove lock cylinder (1) | To do this, remove bolt (4). | |
| Install | ||
5 | Install lock cylinder (1) | Screw in bolt (4) to do this. | |
6 | Install linkage (3) | Let lock (2) engage. | |
| Check | ||
7 | Check function of lock cylinder (1) | ||
| Install | ||
8 | Install inner cover on dropside | ||
9 | Reinstall previously removed detachable parts |