AR54.25-W-2805D | Remove/install operating lever for engine control and continuous brake | 21.2.12 |
MODEL 930, 932, 933, 934 with BODY 943.899
W54.25-1146-11
1 Bolts
2 Clock spring contact
S2 Engine control/permanent brake operating lever
| Removing | ||
1 | Remove steering wheel | ||
2 | Detach cover from steering column | ||
3 | Remove footwell cover on driver side | ||
4 | Unplug connector for clock spring contact (2) in driver's footwell | ||
5 | Remove clock spring contact (2) | ||
6 | Detach connector for engine control/permanent brake operating lever (S2) in driver footwell | ||
7 | Remove engine control/permanent brake operating lever (S2) | ||
| Install | ||
8 | Install engine control/permanent brake operating lever (S2) | The bolts (1) on the engine control/permanent brake operating lever (S2) have a specific length and they must be used for installation. Otherwise the plate of the engine control/permanent brake operating lever (S2) may be damaged. | |
9 | Connect connector for engine control/permanent brake operating lever (S2) in driver footwell | ||
10 | Install clock spring contact (2) | ||
11 | Connect connector for clock spring contact (2) in driver's footwell | ||
12 | Install footwell cover on driver's side | ||
13 | Install cover from steering column | ||
14 | Install steering wheel |