AR54.25-D-1382A | Remove/install electrical center | 7.7.99 |
MODEL 901.6, 902.6, 903.6, 904.6, 905.6
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7
MODEL 690.6
D54.30-1106-06
1 Fuse cover
2 Steering column cover
3 Bolt
4 Nut
5 Circuit 30 cable
6 Nut
7 Electrical center
8 Bolt
9 Nut
10 Washer
11 Electrical lead
| Remove, Install | ||
1 | Disconnect ground lead from battery | ||
2 | Remove fuse cover (1) | Release slotted screw by turning 90° from position A to B. | |
3 | Remove steering column cover (2) | Installation: Route cables (11) between retaining lug on electrical center (7) and mounting point (arrows). Do not damage cables when installing steering column cover (2). | |
4 | Unscrew cable, terminal 30 (5) | ||
5 | Unscrew electrical center (7) and disconnect electrical connections | Installation: Do not twist plug connection of electrical center combination switch. | |
6 | Install in the reverse order | ||
7 | Set time on instrument cluster | except code J19, tachograph | |
8 | Set time on stationary heater timer | With code H11, H12 or H86, auxiliary heater | |
9 | If necessary, code radio |