Remove/install carrier of power steering pump

AR46.30-D-4302C

14.2.96

Steering 763.100 in MODEL 901, 902, 903, 904 with ENGINE 111.979

D46.30-1002-06

1 Crankcase ventilation line

2 Shaped gasket

3 Power steering pump support

4 Allen screw (M880)

5 Hexagon socket bolt (M8  50)

6 Supporting strut

7 Combination screws

8 Power steering pump

9 Combination screw (M8110)

10 Belt pulley

11 Combination screw (M814-10.9)

12 Bracket

13 Combination screws

 	Remove/Install
1	Remove poly V-belt		AR20.40-D-5660C
2	Remove power steering pump (8) and lay down to side with connected oil lines		AR46.30-D-0500-02C
			*BA46.30-N-1001-01A
			*BA46.30-N-1004-01A
3	Remove power steering pump carrier (3) from crankcase	 Installation: Install new seal (2). Note installation position for power steering pump carrier (3)	AR46.30-D-4302-01C
			*BA46.30-N-1002-01A
4	Install in the reverse order

 Power steering pump

Number	Designation		Model 901.0/3/4, 902.0/3/4, 903.0/3/4, 904.0/3/4


BA46.30-N-1001-01A	Power steering pump to timing case cover / carrier	Nm	21
BA46.30-N-1002-01A	Power steering pump A/C compressor carrier to crankcase	Nm	21
BA46.30-N-1004-01A	Bolts, belt pulley to power steering pump	Nm	30