Remove/install parking brake valve

AR42.60-W-0100A

26.11.97

MODEL 950, 952, 953, 954, 957

W42.60-0055-11

1 Paneling

2 Parking brake valve

3 Compressed-air connection, venting

4 Compressed-air connection, spring-loaded cylinder

5 Compressed-air connection, supply pressure

 	Remove/Install
1	Discharge compressed-air system
2	Remove paneling (1) from parking brake valve (2).
3	Remove parking brake valve (2).
4	Label compressed-air connection, venting (3), compressed-air connection, spring-loaded cylinder( 4), and compressed-air connection, supply pressure (5) according to labeling on parking brake valve (2) and detach.	With compressed air connector system "VOSS 230".	AR42.10-W-0900A
		With compressed air connector system "VOSS 232" (NG 8, 12) or "SCHÄFER SDF" (NG 6).	AR42.10-W-0900C
		 Installation: Check O-rings, install new O-rings if necessary, and note marking.
	Notes on compressed air connector systems		AH00.18-N-0001-01A
5	Install in the reverse order
6	Fill compressed-air system	 Allow the engine to run until the brake system comes up to pressure.