Remove/install ABS sensor

Vrsta ar · tema 42.30 · različica 0120 · 2008-11-18

Velja za: MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976 MODEL 671 with FRONT AXLE 733.406

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

AR42.30-W-0150A

11.11.08

MODEL 374, 375, 930, 932, 933, 934, 940, 942, 943, 944, 949, 950, 952, 953, 954, 957, 958, 970, 972, 974, 975, 976

MODEL 671 with FRONT AXLE 733.406

W42.30-0001-01

Front axle rpm sensor, shown on disk brake

1 Rpm sensor

2 Socket

W42.30-0004-01

Rear axle rpm sensor, shown on disk brake

1 Rpm sensor

2 Socket

3 Cover

 	Remove/install
1	Detach cover (3) from rpm sensor (1)	 Only at rear axle.
2	Remove rpm sensor (1)	 Installation: Apply a thin coating of grease to the rpm sensor (1) and push by hand all the way into the bushing. The gap between the rpm sensor (1) and measuring ring is adjusted automatically by the wheel bearing play.	*BR00.45-Z-1019-06A
3	Remove socket (2)	 Installation: Replace the bushing (2).
4	Install in the reverse order

Repair materials

Number	Designation	Order number
BR00.45-Z-1019-06A	ABS sensor grease	A 000 989 62 51 10