ar4210w020001b
Removing thrust piece with bellows
Vrsta ar · tema 42.10 · različica 0100 · 2016-05-12
Velja za: Model 963 Disk brake ∅ 17.5", Knorr Model 967 Disk brake ∅ 17.5", Knorr'
Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.
Umestitev
Funkcijska skupina 2 Podvozje › 42 Hidravlika zavor in mehanika › 42.10 Delovna zavora — Serija 963 · Serija 967
EinPAS 21 zaviranje/podtlačni sistem/pnevmatski sistem › 21.15 delovna zavora/podtlačni sistem › 21.15.40 delovna zavora, spredaj — Serija 963 · Serija 967
EinPAS 21 zaviranje/podtlačni sistem/pnevmatski sistem › 21.15 delovna zavora/podtlačni sistem › 21.15.42 delovna zavora, zadaj — Serija 963 · Serija 967
AR42.10-W-0200-01B
| Removing thrust piece with bellows
|
|
|
| Notes on tool combinations for repairs on the brake caliper
|
| AH42.10-N-9406-11H
|
Model
| 963
|
|
| Disk brake Ø 17.5", Knorr
|
Model
| 967
|
|
| Disk brake Ø 17.5", Knorr
|
1
| Prepare tool combination (WK 1).
|
T15
| Press-off fork
|
WK1
| Tool combination
|
2
| Use ejector fork T5 (1) to pry off thrust piece (2) from threaded tube (3).
|
|
| The flat side of the ejector fork T5 (1) must face the threaded pipe (3).
|
3
| Apply screwdriver (4) to seat of bellows and drive-in by approx. 4 mm, in doing so do not damage the inner dust cap and seat.
|
|
| If the inner dust cap is damaged.
|
|
|
|
|
| Replace brake calipers.
|
5
| Remove dry liner from cone of threaded tube (3).
|
|
| If the thread of the threaded tube (3) is corroded or water ingress is found.
|
|
|
|
|
| Replace brake calipers.
|
Povezani dokumenti
