ar4210w020001a

Removing thrust piece with boots

Vrsta ar · tema 42.10 · različica 0200 · 2012-01-16

Velja za: MODEL 374, 930, 932, 933, 934, 940, 942, 943, 958.2 /4 mit Scheibenbremse SN 7000 MODEL 375.3 /4, 944, 950, 952, 953, 954, 957 mit Scheibenbremse SB 7000, SN 7000 MODEL 375.1, 970, 972, 974, 975, 976 mit Scheibenbremse SB 6000, SN 6000

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 42 Hidravlika zavor in mehanika › 42.10 Delovna zavora — Serija 374 · Serija 375 (modeli 1**, 3**, 4**) · Serija 930 · Serija 932 · Serija 933 · Serija 934 · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 · Serija 952 · Serija 953 · Serija 954 · Serija 957 · Serija 958 (modeli 2**, 4**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 21 zaviranje/podtlačni sistem/pnevmatski sistem › 21.15 delovna zavora/podtlačni sistem › 21.15.40 delovna zavora, spredaj — Serija 374 · Serija 375 (modeli 1**, 3**, 4**) · Serija 930 · Serija 932 · Serija 933 · Serija 934 · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 · Serija 952 · Serija 953 · Serija 954 · Serija 957 · Serija 958 (modeli 2**, 4**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 21 zaviranje/podtlačni sistem/pnevmatski sistem › 21.15 delovna zavora/podtlačni sistem › 21.15.42 delovna zavora, zadaj — Serija 374 · Serija 375 (modeli 1**, 3**, 4**) · Serija 930 · Serija 932 · Serija 933 · Serija 934 · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 · Serija 952 · Serija 953 · Serija 954 · Serija 957 · Serija 958 (modeli 2**, 4**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

AR42.10-W-0200-01A

Removing thrust piece with boots

Modification notes

3.11.11

To pry off the thrust pieces with boots, use the tool combination (WK 1) from the tool box K005972 supplied by the Knorr company, added.

Removing thrust piece with boots

W42.10-1323-10

To pry off the thrust pieces with boots, use the tool combination (WK 1) from the tool box K005972 supplied by the Knorr company.

T15 Press-off fork

Removing thrust piece with boots

W42.10-1337-11

1 Carefully drive in screwdriver approx. 4 mm only, deform seat ring of boots (1) and pry boots (1) out of seat (2).

Do not damage inner seal cap or seat (2) of the boots.

Removing thrust piece with boots

W42.10-1338-11

2 Use the prying fork (T15) pry the thrust piece (3) with boot (1) off the threaded pipe (4).

Fit the prying fork (T15) with the flat side facing the threaded pipe (4).