Detach/attach brake caliper on brake carrier

AR42.10-W-0091D

Detach/attach brake caliper on brake carrier

12.02.2019

Model

963, 964

Disk brake Ø 22.5", Wabco

1

Brake caliper

2

Vise

3

Cover

4

Flat tip screwdriver

1

Brake caliper

5

Brake carrier

6

Bolts

Topical note

Notes on threaded connections fastened using a tightening angle-based tightening process

AH00.00-P-0020-01A

 

Remove/install

1

Remove brake carrier (5) with brake caliper (1)

AR42.10-W-0600H

2

Clamp brake carrier (5) with brake caliper (1) into vise (2)

3

Remove both covers (3)


Do not position flat tip screwdriver (4) between cover (3) and brake caliper (1), but only at the small diameter of the cover (3).
Otherwise, the seat of the cover (3) in the brake caliper (1) may be damaged.

 Installation: Grease pilot bushings in brake caliper (1) and install new cover (3).

Installation grease (white) part number: II 14525

*BR00.45-Z-1021-06A

4

Remove bolts (6)

 Installation: Install new bolts (6).

 Bolt, brake caliper to brake carrier (Wabco)

*BA42.10-N-1014-22A

5

Remove brake caliper (1) from brake carrier (5)

 Installation: Clean contact surfaces of brake caliper (1) and brake carrier (5).

6

Install in the reverse order

 Disk brake

Number

Designation

Model 963, 964

BA42.10-N-1014-22A

Bolt, brake caliper to brake carrier (Wabco)

M16x1.5

Stage 1

Nm

130

Stage 2

°

90

Repair materials

Number

Designation

Order number

BR00.45-Z-1021-06A

Installation grease (white) part number: II 14525

Knorr-Bremse AG
Moosacher Str. 80
80809 Munich, Germany
Germany
Tel. +49 89 3547-0
Fax +49 89 3547-2767
www.knorr-bremse.de